Faqs
- Home
- Faqs
Frequently Asked Questions
We provide full-scope diagnostic and repair services for all industrial, commercial, and residential diesel and petrol generators across Abu Dhabi and surrounding regions. Our services include:
- Electrical Motor Rewinding & Electrical system troubleshooting (alternators, Automatic Voltage Regulators – AVR, control panels, circuit breakers, and ATS switches).
- Mechanical and engine repairs (fuel injection systems, turbochargers, cooling systems, and water pumps).
- Complete engine overhauls and rewinding.
- Fuel system flushing, filter replacements, and radiator cleaning.
Yes. We offer 24/7 emergency repair support with mobile service units equipped with diagnostic tools and essential fast-moving spare parts. Whether your unit experiences a sudden power trip in Musaffah, ICAD, KIZAD, Yas Island, Reem Island, Al Dhafra Region, Sadiyath island, Al Bahya or Al Ain, our technicians dispatch rapidly to minimize operational downtime.
You should call for professional service immediately if you notice:
- Difficulty starting or failure to crank.
- Unusual engine noise, excessive vibration, or black/white smoke exhaust.
- Voltage fluctuations or unstable frequency output.
- Fluid leaks (diesel oil, coolant, or lubricant drops).
- Low battery warning or control panel fault alarms.
Our customized Generator AMC packages in Abu Dhabi ensure continuous power reliability and extended equipment lifespan. Standard AMC coverage includes:
- Scheduled Preventive Maintenance (PMC): Periodic oil, air, and fuel filter replacements.
- Electrical & Safety Inspections: Battery testing, terminal tightening, ATS panel integration, and AVR calibration.
- System Testing: Radiator coolant inspection, belt tensioning, and full-load bank testing.
- 24/7 Emergency Breakdown Coverage: Priority dispatch with zero response delay for contract holders.
Extreme heat, ambient dust, high humidity, and coastal salinity in the UAE severely strain generator cooling systems, air filters, and electrical components. Regular maintenance prevents overheating, fuel contamination, wet-stacking, and premature battery failure, reducing unexpected major repair expenses by up to 70%.
We offer tailored plans designed for construction sites, industrial plants, commercial buildings, healthcare facilities, and residential villas:
- Preventive Maintenance Contract (PMC): Regular scheduled servicing, fluid checks, and minor parts replacements.
- Comprehensive Maintenance Contract (CMC): Covers all scheduled services, consumable items, major emergency repairs, and full spare parts management.
- One-Time / On-Call Servicing: Ideal for emergency call-outs, post-repair checkups, or pre-inspection servicing.
Our multi-brand talented technicians repair, service, and overhaul all leading global generator and engine manufacturers, including:
Perkins, Cummins, Caterpillar (CAT), Volvo Penta, Deutz, Mitsubishi.Denyo, Kohler, Doosan, JCB, John Deere, Yanmar, SDMO, FG Wilson , Weichai , kohler, MTU, Baudouin , Dongfeng, Kirloskar, Yanmar and many more industry lead brands
Stamford, Leroy-Somer, and Mecc Alte , Voltaz, Taal, alternators.
- Yes. We source and supply Genuine OEM spare parts. This includes original filters, fuel pumps, injectors, gaskets, belts, Automatic Voltage Regulators (AVR), digital controllers, battery chargers, and complete overhaul kits to ensure maximum efficiency and preserve manufacturer warranties.
Standby Generators: Serviced every 6 months or 250 operating hours (whichever comes first), along with monthly operational test runs.
- Continuous / Prime Generators: Serviced every 200 to 250 running hours due to heavy daily usage.
- Air & Fuel Filters: Inspected or changed more frequently during dusty summer months.
We cover the entire Emirate of Abu Dhabi, including:
- Abu Dhabi Island & City: Reem Island, Yas Island, Saadiyat, Khalifa City, Mussafah Industrial Area.
- Industrial Zones: ICAD (1, 2, 3), KIZAD, Mafraq, Mussafah M1 to M45.
- Outlying Areas: Al Ain, Ruwais, Tarif, Mirfa, and Western Region (Al Dhafra) project sites.
You can request a quote by calling our direct service hotline or filling out our online contact form with your generator brand, kVA capacity rating, location, and required service. Our technical coordinators will provide a transparent, competitive estimate.
We provide complete electromechanical repair and rewinding services for a broad range of Low Voltage (LV) and High Voltage (HV) electrical motors, including:
- AC Motors: Single-phase, three-phase, squirrel cage, slip-ring, and synchronous motors.
- DC Motors: Shunt, series, compound, and armature-wound motors.
- Specialized Equipment:Submersible pump motors, chiller compressor stators, explosion-proof motors, and elevator/crane motors.
: Motor rewinding is typically recommended if the motor casing, rotor, and mechanical core remain structurally sound, but the internal coil insulation has degraded or shorted out. Common signs include:
- Frequent circuit breaker tripping or short circuits.
- Burning insulation smell or visible discoloration on coil windings.
- Severe overheating during standard rated loads.
- Extremely low phase resistance or failed insulation test readings (Megger test).
In most cases, professional motor rewinding restores original performance at 30%–50% of the cost of buying a new unit.
Our workshop and field technicians service all major international motor and drive manufacturers, including:
- ABB, Siemens, WEG, TECO, and Leroy-Somer.
- Marathon, Brook Crompton, SEW-Eurodrive, Bauer, and Kirloskar.
- Nidec, Toshiba, Baldor, and US Motors.
Every job follows a systematic testing and quality procedure:
- Initial Inspection & Testing: Insulation resistance tests, surge tests, and physical mechanical evaluations.
- Disassembly & Stripping: Controlled coil removal to prevent damage to the stator core laminations.
- Precision Rewinding: Installing fresh, high-grade Class H/F copper magnet wire with tailored slot insulation.
- Varnish Impregnation & Baking: Applying protective insulating resin for maximum humidity and thermal resistance.
- Reassembly & Mechanical Restoration: Bearing replacements, dynamic rotor balancing, shaft alignment, and final dynamic load testing.
Turnaround time depends on motor frame size and kVA/kW rating:
- Standard Industrial Motors (Up to 45 kW): 24 to 48 hours.
- Large Industrial & HV Motors: 3 to 5 working days (includes varnish curing and dynamic balancing).
- Emergency Rapid Response: Express turnaround services are available upon request to minimize costly industrial downtime.
You can request an instant quote by contacting our workshop or submitting your motor details online. Please provide:
- Motor brand and model number.
- Power rating (kW / HP / kVA) and RPM.
- Description of the fault or required service (rewinding, bearing replacement, overhauling).
Choosing the correct kVA size depends on your total electrical load and peak starting power requirements:
- 20 kVA – 60 kVA: Ideal for small construction sites, office trailers, residential backup, mobile food trucks, and light event power.
- 100 kVA – 250 kVA: Suitable for medium-scale commercial sites, tower cranes, batching plants, and event staging.
- 350 kVA – 750 kVA: Designed for large industrial facilities, high-rise building construction, district cooling backups, and utility power outages.
- 1000 kVA – 1500 kVA:Heavy-duty continuous power for oil & gas refineries, manufacturing plants, infrastructure projects, and multi-megawatt setups.
Our engineering team provides complimentary on-site load assessments and sizing calculations across Abu Dhabi.
Yes. Our fleet from 20 kVA to 1500 kVA includes sound-attenuated canopy generators operating within noise level limits (50–65 dB at 7 meters). These units are ideal for residential zones, hotel events, hospitals, and urban night construction.
With our central fleet yard based in Mafraq industrial area, we offer 24/7 same-day emergency dispatch and standard delivery within 2 to 4 hours to key industrial areas, including:
- Musaffah Industrial Area (M1 to M45)
- ICAD (1, 2, 3) & KIZAD Industrial Zones
- Yas Island, Saadiyat Island, Reem Island, and Khalifa City
- Remote sites in Al Ain, Ruwais, and the Western Region (Al Dhafra).
We offer flexible rental packages designed to suit any project timeline:
- Daily / Short-Term Rental: Perfect for events, short outages, or temporary power testing.
- Weekly Rental: Designed for short shutdowns and site commissioning.
- Monthly & Long-Term Contracts:Highly cost-effective rates for ongoing construction projects, industrial plants, and facilities maintenance.